Voyager Mk2 Combi Pack
R1198,00
Voyager Mk2 automatic pool cleaners are robust and hardworking models and easy to install. They feature exceptional design for use in a variety of pool sizes and shapes. Spares are freely available and inexpensive to ensure that you get the most from your pool cleaner.
Pre-installation Checklist
- Attach the Poolmaid disc by placing the disc over the body (see figure 1) and positioning it below the wings (figure 2).
- The disc must be attached with the fins on top and the flat surface facing down. Disc is marked “Top”. The disc should rotate freely.
- The float and clip-on weight have been set by the factory for most pools. However, the float and clip-on weight can be adjusted for the optimal setting for your pool by doing the following. Put the cleaner, with the hoses attached, in the deep end of the pool. Please ensure that all the air is out of the hoses. Start adjustment with the float first. When the cleaner and disc sit flat on the pool floor, then the adjustment is correct. Changing the weight and float settings gives the Poolmaid Pool Cleaner a different random pattern.
- Insert the bump strip into the slots provided. Insert bottom end first and adjust top end according to the obstacles in your pool.
- Assemble sufficient lengths of hoses to cover the distance from weir to furthest point away from the weir plus one extra length of hose. Remove the air from the hoses by pushing the hoses vertically into the pool. Install the Poolmaid Weir Valve in the weir/skimmer box inlet and attach the pool hoses.
- Switch on your filtration unit
FAQ's - Redefine Smart Pool Care
Should I Buy a Robotic Pool Cleaner or Hire a Service?
Beatbot is a cordless cleaner and a proven solution to maintenance free pools and can provide extensive cleaning ranges which include Surface, Floor, Wall and Waterline cleaning modes. Added to its list of benefits you will enjoy access to water clarification using its Clearwater Natural Clarification (Skin-safe and Eco-friendly). Beatbot provides a 3 year warranty period with worldclass service and support and boasts the lowest defective rate in the industry.
How Much Does It Cost to Hire Someone to Clean Your Pool?
Own your own robotic cleaner for as little as R3,725 /month today for an all-in-one solution. Choose your payment plan with our Payflex facility. Professional weekly cleaning services typically cost between R500 and R1,000 per visit, or roughly R2000–R3,900+ per month depending on pool size.
How Often Should You Run a Robotic Pool Cleaner?
Minimum of 4 hours per day is a recommended maintenance schedule.
How Do Robotic Pool Cleaners Get Their Power?
Beatbot uses a docking station for regular charging. Automatic surface parking is a standard feature with all Beatbot AquaSense 2 machines.
Can You Use a Robotic Pool Cleaner in a Saltwater Pool?
AquaSense 2 is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPM but don’t worry, we have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.